Head & Face Protection — Head Protection
• Modern Stylish Design
• ABS Shell
• Vents to crown
• Lightweight
• Plastic harness c/w sweatband
• Slots for attachments
• Conforms to EN397
• Modern Stylish Design
• ABS Shell
• Vents to crown
• Lightweight
• Plastic harness c/w sweatband
• Slots for attachments
• Conforms to EN397
Stylish fashionable 100% cotton baseball cap with ventilation holes. Fitted over a plastic shell providing lightweight head protection.
Fits 54cm - 59cm Circumference
Conforms to EN812: 2012
Stylish fashionable 100% cotton baseball cap with ventilation holes. Fitted over a plastic shell providing lightweight head protection.
Fits 54cm - 59cm Circumference
Conforms to EN812: 2012
Stylish fashionable 100% cotton baseball cap with ventilation holes. Fitted over a plastic shell providing lightweight head protection.
Fits 54cm - 59cm Circumference
Conforms to EN812: 2012
Stylish fashionable 100% cotton baseball cap with ventilation holes. Fitted over a plastic shell providing lightweight head protection.
Fits 54cm - 59cm Circumference
Conforms to EN812: 2012
Stylish fashionable 100% cotton baseball cap with ventilation holes. Fitted over a plastic shell providing lightweight head protection.
Fits 54cm - 59cm Circumference
Conforms to EN812: 2012
• 100% Cotton
• Standard peaked cap
• Comfortable to wear over long periods
• 5 Panel Cap
• Pull down buckram
• Plastic Snap Adjuster
• One size fits all
• 100% Cotton
• Standard peaked cap
• Comfortable to wear over long periods
• 5 Panel Cap
• Pull down buckram
• Plastic Snap Adjuster
• One size fits all
• 100% Cotton
• Standard peaked cap
• Comfortable to wear over long periods
• 5 Panel Cap
• Pull down buckram
• Plastic Snap Adjuster
• One size fits all
• 100% Cotton
• Standard peaked cap
• Comfortable to wear over long periods
• 5 Panel Cap
• Pull down buckram
• Plastic Snap Adjuster
• One size fits all
• 100% Cotton
• Standard peaked cap
• Comfortable to wear over long periods
• 5 Panel Cap
• Pull down buckram
• Plastic Snap Adjuster
• One size fits all
• Two Layers.
• 100% FRcotton shell with fleece lining.
• Regular length.
• Colour: Shell - Navy, Lining - Red.
• Cotton twill is flame retardant treated.
• 2 internal ear pockets for use with warmer pads.
• Hook and loop fastening chin strap
Features
• Bandana/headband - tie closure
• Activate by soaking in water for 2-5 minutes
• Remains hydrated for up to 4 hours
• Re-usable: just soak in water to re-activate
Application
Construction
Trade
Maintenance
Landscaping/Grounds
Assembly/Fabrication
Material Handling
Freight/Baggage
Warehousing/Distribution
Iron/Steel Fabrication
• The Standard HDPE frame uses slot adapters compatible with any MSA slotted helmets (included with each frame) and a wide choice of V-Gard visors
• Works with or without ear defenders- adaptors stow away when using ear defenders resulting in no more lost parts
• Conforms to EN 166 (When worn with appropriate visor)
- 3 = Liquids
- 8 = Resistance to short circuit electric arc
- 9 Non adherence of molten metals and resistance to penetration of hot solids
- B = Medium Energy Impact (120 m/s)
- T = Impact resistance at extreme of temperatures (-5/+55°C)
• Conforms to EN 1731 (When worn with appropriate visor)
- F =Low Energy Impact (45m/s)
V-Gard Headgear is a brow guard that in combination with the wide range of V-Gard Visors offers a lightweight, comprehensive face protection system. Featuring a durable and stylish HDPE frame and the choice of over 20 visors it is ideal for many applications. With the unique 3-point visor load system visors are fitted or removed easily and quickly. Adjustable to all head sizes and with two comfort sweatbands all day comfort is ensured.
• Self-retaining, easy-to-grip visor adjustment knobs – no more lost parts!
• Seven-point crown adjustment to fit most head sizes and shapes
• Replaceable, sweat-wicking, cushioned headband helps keep workers dry and cool
• Sweat-wicking ratchet cover keeps nape comfortable
• For use ONLY with wide range V-Gard Visors; not for use where head protection is required
• All non-metal construction
• Conforms to EN1731:2006 Personal eye protection. Mesh eye and face protectors
• Conforms to EN 166:2002 Personal eye protection. (When worn with appropriate visor)
Push-Key suspensions designed exclusively for MSA V-Gard® Industrial Safety Helmets.
The Push-Key suspension with its innovative adjustment concept brings an extraordinary way to enhance user retention and comfort.
Push-Key the new suspension with the best cost-benefit ratio offered in the market.
MSA Push-Key suspension exclusive features and benefits
EASE OF USE:
• This is the fastest sliding suspension on the market: simple push to loosen, squeeze to tighten
• Can be adjusted with one hand even when worn
SURE FITTING:
• It offers greater retention capacity than competitive sliding suspensions because it's so much easier to select the best adjustment position
ADJUSTABILITY:
• 2 levels of nape adjustment for fitting comfort
• Designed to avoid interference with other PPE such as ear muffs
SWEATBAND COMFORT:
• 2 different options: sewn in PVC perforated wipeable or sweat-wicking foam
• Also available Terry cotton washable sweatband, MSA696688 that can be used over both sewn in PVC or replaceable foam sweatbands for increased user comfort
Fas-Trac III ratchet suspensions designed for MSA V-Gard® industrial safety helmets.
Extensive customer research shows the Fas-Trac III suspension was preferred by most users over what they were currently wearing because its improved helmet comfort, retention and stability whilst being easy to use with or without gloves
MSA Fas-Trac III suspensions features and benefits
• BALANCE & STABILITY:
- Lower nape strap improves retention: Helmets stay on when leaning over
- Adjusts for a custom fit to the back of the head
• HEADBAND COMFORT:
- The comfort pad by separating the ratchet from the head, cradles the head increasing comfort and cooling airflow
- Prevents hair from getting pulled
• EASE OF USE:
- Ratchet offers smooth rotation: reduced effort to turn
- Easy grip knob adjustable even with gloves on
• ADJUSTABILITY:
- Three levels of nape height adjustment giving superior nape fit
- Avoids interference with other PPE such as ear muffs
• SWEATBAND COMFORT:
- Largest sweatband surface area on the market covers more of the headband and user's forehead for increased comfort
- 2 different sweatband options: sewn in PVC perforated wipeable or sweat-wicking washable foam (breathable fabric allows direct air permeation)
- Replaceable foam sweatband can be attached over the existing sweatband without demounting the suspension
- Also available Terry cotton washable sweatband, MSA696688 that can be used over both sewn in PVC or replaceable foam sweatbands for increased user comfort
• Soft wide cushions helps reduce pressure around the ears and improves comfort and wearability
• Large space inside cup helps reduce moisture and heat build-up
• Easy to replace cushions and inserts helps keep them hygienically clean
• P3E Helmet attachment for helmet mounting
SNR = 31dB, H = 34dB, M = 28dB, L = 19dB
• A waterproof, breathable, true high visibility cap with 360 degree reflective band for enhanced safety
• Maximum 360 degree visibility - reflective piping and strip
• True high visibility - EN471 specified fabrics; compliment workwear
• Waterproof & breathable polurethane polyester fabric
• First Base 3 Classic High Visibility keeps workers visible and dry .
• Standard Peak size 70mm
CE Standard : EN812
• A waterproof, breathable, true high visibility cap with 360 degree reflective band for enhanced safety
• Maximum 360 degree visibility - reflective piping and strip
• True high visibility - EN471 specified fabrics; compliment workwear
• Waterproof & breathable polurethane polyester fabric
• First Base 3 Classic High Visibility keeps workers visible and dry .
• A waterproof, breathable, true high visibility cap with 360 degree reflective band for enhanced safety
• Maximum 360 degree visibility - reflective piping and strip
• True high visibility - EN471 specified fabrics; compliment workwear
• Waterproof & breathable polurethane polyester fabric
• First Base 3 Classic High Visibility keeps workers visible and dry .
First Base 3 Winter Bump Cap helps safeguard employee health and safety by maintaining worker alertness and letting them concentrate solely on the task in hand. 360 degree reflective strips provide the best possibility to be seen in all light conditions, helping alleviate potential accidents in today's Zero harm business cultures.
• Waterproof & breathable outer fabric maintains dryness without overheating
• 360o reflectivity ensures workers stay visible in all light and weather conditions
• Stylish and practical cap design ensures high levels of wearer adoption and acceptance
• CE certified to EN812:A1
• Flexible ABS protective shell guards against bumps and lacerations to the head
•ABS (Acrylonitrile Butadiene Styrene)
• Standard peak length
• Timeless look and appeal
• Lightweight micro-fibre fabric reduces humidity and permits air crculation
• Side mesh ventilation enhances breathablility
• Conforms to EN812
