Beeswift
Mixed fibre non specific glove.
70/30 cotton / polyester blend.
One size.
Can be used as heavyweight liner.
Minimal Risk
Protects against:
Chemical & Viral agents (including Coronavirus
Bloodborne pathogens
Sulphuric acid
Contaminated liquids
Radioactive Contamination
For fine dust particles, reduced spray and limited splash
Anti-static
2 way zip front with storm flap
Elasticated cuffs, ankles, waist and hood
Microporous fabric 54% polypropylene + 46% polyethylene
Individually packaged
EN 13034: 2005 + A1: 2009
EN13982-1: 2005 + A1: 2010
EN 1149-5: 2008 Anti-Static – Material Performance and Design Requirements
EN 1073-2: 2002 Protective Clothing against radioactive contamination (no rays)
EN 14126: 2003 + AC:2004 Protective clothing against Infective agents (Type 4B, 5B, 6B)
Face piece produced from soft non-allergic TPE material
Provides excellent fit to aid with protection
Low profile design offers improved field of vision
Soft adjustable strap ensures a perfect fit to wide range of contours
Can be fitted with A1, ABEK, and P3 filter cartridges
Gas filters can be fitted with replaceable pre-filters and retainer adapters
A1 Filters for BB3000 Respirator Range
Filters organic vapour solvents such as White Spirit Toluene or Carbon Tetrachloride (CCl4)
A1P2 Filters for BB3000 Respirator Range
Filters:
Organic Vapour solvents such as White Spirit Toluene or Carbon Tetrachloride (CCl4).
Fine Toxic Dust, Water and Oil based Mists/Aerosols.
For protection against organic gases and vapours with a boiling point > 65 deg c.
Inorganic gases and vapours, Sulphur Dioxide and other acidic gases and vapours as well as against ammonia and organic ammonia derivatives.
Filter type and Class : ABEK1
B1 Filters for BB3000 Respirators
Filters Inorganic gases e.g. Chlorine (Cl2) or Hydrogen Sulphide (H2S).
K1 Filters for BB3000 Respirators.
Filters Ammonia (NH3) and certain Amines.
P3 Filters for BB3000 Respirators
EN143:2007
Filters Fine Toxic Dust, Fumes, Water and Oil based Mists/Aerosols.
Pre Filters for BB3000 Respirators
Cartridge Retainers for BB3000 Respirators
Pre-assembled ready mask c/w A1P2 filters
Face piece produced from soft non-allergic TPE material
Provides excellent fit to aid with protection
Low profile design offers improved field of vision
Soft adjustable strap ensures a perfect fit to a wide range of contours
Can be fitted with A1, ABEK and P3 filter cartridges
Gas filters can be fitted with replaceable pre-filters and retainer adapters.
Provided filters protect against:
Organic Vapour Solvents such as White Spirit Toluene or Carbon Tetrachloride (CCl4)
Particulate Fine Toxic Dust, Water and Oil based Mists/Aerosols.
Half Mask Conforms to EN140:1998
Filters Conform to EN14387:2001
Carbon helps absorb smell and odours.
Adjustable nose bridge.
Space saving design.
Adjustable elastic straps.
Dolomite clogging tested, gives better breathing resistance and for a longer time period.
Easy breath exhale valve.
Individually packed.
Fits neatly into a breast pocket.
Conforms to EN149:2001+A1:2009 FFP2 NR D
For Hazard Type: Toxic dusts, fumes and water-based mists.
Example: Working with hardwood, glass fibres and plastic (non PVC) and some metalwork.
Unique "Big Eye" design provides very low breathing resistance due to the increased filtration area.
Polypropylene (P.P) outer layer provides smooth lining and avoids loose fibres.
Embossed fringe seal avoids fluffy open layers around the edges.
Adjustable head strap ensures the best facial seal with minimum leakage.
Contour design ensures the compatibility of glasses/goggles reducing fogging.
Full facial close-cell foam seal for improved fit.
Adjustable nosepiece ensures increased worker comfort and acceptance.
Protection level FFP3 with exhalation valve.
Conforms to EN149:2001 + A1:2009 FFP3 NR
Excellent face fit test results.
For Hazard Type: Toxic dusts, fumes and water-based mists.
Example: Working with hardwood, glass fibres and plastic (non PVC), metalwork and welding.
Unique "Big Eye" design provides very low breathing resistance due to the increased filtration area.
Polypropylene (P.P) outer layer provides smooth lining and avoids loose fibres.
Embossed fringe seal avoids fluffy open layers around the edges.
Adjustable head strap ensures the best facial seal with minimum leakage.
Contour design ensures the compatibility of glasses/goggles reducing fogging.
Full facial close-cell foam seal for improved fit.
Adjustable nosepiece ensures increased worker comfort and acceptance.
Protection level FFP3 with exhalation valve.
Conforms to EN149:2001 + A1:2009 FFP3 NR
Excellent face fit test results.
For Hazard Type: Toxic dusts, fumes and water-based mists.
Example: Working with hardwood, glass fibres and plastic (non PVC), metalwork and welding.
Maintenance free particulate respirator.
Polypropylene (P.P) outer layer provides smooth lining and avoids loose fibres.
Latex free synthetic rubber head strap.
Contour design ensures the compatibility of glasses / goggles and reduces fogging.
Soft close-cell nose foam and adjustable nosepiece ensure custom shape and increase the worker comfort and acceptance.
Conforms to EN149:2001 + A1:2009 FFP3 NR V
For Hazard Type: Fine Toxic dusts, fumes and water-based mists.
Example: Working with hardwood, glass fibres and plastic (non PVC), metalworking and welding.
Our most economical knee pads
Protects knees against the rigours inherent in kneeling on hard or rough surfaces
Impact resistant
Adjustable knee straps
Heavy duty protection.
Protects knees against injuries often sustained in rigorous working conditions when kneeling for long periods.
Lightweight pads with hard riveted caps produced from abrasion resistant plastic.
Soft foam padding and adjustable straps ensure hours of comfortable productive work.
Deluxe model offering excellent protection.
Made using non marking material.
Rubber-like surface with grip ridges help prevent sliding and slipping.
Hook and loop Adjustable straps.
Heavy duty nylon construction to resist abrasion and tear.
Adjustable clip buckle and hook and loop closure.
Hard shell cap to aid swivelling.
Gel foam centre to cap for even weight distribution when worn
for long periods.
An all round superior Knee Pad.
Fully CE approved
Conforms to EN14404:2004 Type 1 Level 1
Universal sizing.
Ergonmic design.
Easily moulds around knee and can be trimmed to size.
For use with all knee pad type work trousers.
Super soft
Double sided
15cm x 12cm
Conatains 600 tissues
250ml bottle of lens cleaning fluid in pump dispenser.
Tissues dispence from left and right sides
Stands freely or wall mountable
Not to be used with contact lenses
Fire assembly point safety sign
Rigid PVC
Sticks to most surfaces
Can be wiped clean
300 x 200mm