Ansell
Ansell’s Industrial division manufactures and markets high-performance, multi-use protection solutions specific for hand, foot, and body protection, for a wide-range of Industrial applications...
Ultralight duty cut resistant glove
First 18-gauge glove with EN level 3 cut-protection & EN level 3 abrasion protection
Dyneema Diamond Technology
Thin PU coating, for a new degree of dexterity and tactility for applications with cut risks
Soft ultralight-duty seamless liner to keep hands cool, dry & enhance flexibility, fingertip sensitivity with superior comfort
Excellent flexibility and fit with optimal cut protection
INTERCEPT TECHNOLOGY® cut resistance yarn offers best-in-class cut protection and increased comfort and dexterity
Palm coating design to improve worker grip, extends glove life in abrasive conditions and allows the back-of-hand to breathe
Grey coating hides dirt in environments with dirt exposure
Excellent flexibility and fit with optimal cut protection
INTERCEPT TECHNOLOGY® cut resistance yarn offers best-in-class cut protection and increased comfort and dexterity
Palm coating design improves woker grip, extends glove life in abrasive conditions and allows the back-of-hand to breathe
Grey coating hides dirt in environments with dirt exposure
Automatic knit liner 100% Kevlar® fibre
Comfort and sure grip
Constructed from high-tech 100% Kevlar® para-aramid short fibres
Exceptional cut resistance with dexterity
Very high cut resistance to weight ratio
Thumbslot for additional protection of the wrist
Length: 10 inch
EN388:2003 134X
EN388:2016 133XC
EN407: X1XXXX
Automatic knit liner 100% Kevlar® fibre
Comfort and sure grip
Constructed from high-tech 100% Kevlar® para-aramid short fibres
Exceptional cut resistance with dexterity
Very high cut resistance to weight ratio
Thumbslot for additional protection of the wrist
Length: 14 inch
EN388:2003 134X
EN388:2016 133XC
EN407: X1XXXX
INTERCEPT Technology® delivers highest 360° Cut Protection Level F throughout the entire glove & cuff
Stain masking designed for extended use life
Ideal Applications
Fruit and vegetable processing
Poultry processing
Prepared meals
EN388:2016
4X4XF
12 pieces in a polybag, 2 polybags in a carton
Durable and comfortable glove for welding applications
Offers high levels of molten splash resistance, ideal for many applications requiring thermal protection. Also, provides superior durability and good protection from cuts, punctures and abrasions
Soft inner jersey palm lining and a cotton denim cuff makes the glove comfortable to wear
Tough-wearing leather with palm reinforcement for added abrasion resistance
Seams are made in Kevlar and are reinforced by pieces of cowhide to provide superior mechanical protection]
Supersedes the classic leather general purpose glove for medium-duty applications
More flexible, comfortable, far more hard-wearing
Nitrile impregnated coating on a jersey liner
High performance nitrile impregnation, for a superior resistance to abrasion and good protection against snags, cuts and puncture
Effectively repels grease, oil and dirt
Excellent dry-grip. Makes handling quicker and easier
Safely machine-washable: will not shrink, stiffen or lose its shape
More hygienic and longer lasting - can safely and economically be re-used
Can be worn on their own or as liners
No seams to rub or irritate. Permits a longer, more comfortable wear with no weak points which may split or fray
Stringknit construction allows good air flow to the hand. Hands don’t become hot and sweaty
Washable at 40 deg C. Will not shrink, stiffen or lose shape
Lightweight reusable, nitrile gloves designed specifically for food processing and handling
Improved grip with diamond pattern surfacing for unmatched grip in wet and oily conditions
Outstanding flexibility and dexterity, even at low temperatures
Liquid-proof VersaTouch can be used on their own or as outer gloves over thermal liners or cut resistant gloves
Latex-free formulation presents no risk of Type 1 allergies
High comfort, chemical resistant glove for safe handling in a wide range of work environments where harsh chemicals are present
Cotton flock liner to the glove with nitrile film, to offer exceptional comfort to the wearer
Unequalled abrasion resistance
Reversed lozenge finish to enhance levels of grip
Sand patch finish for a smooth surface
Length 330mm and thickness 0.38mm
Designed for light to medium chemical applications
Protects against exposure to oils and grease
Featuring ANSELL GRIP technology for optimal control when handling oily or wet items. Less force is required on slippery objects, reducing hand and arm fatigue
Thin, double-wall nitrile shell and 15-gauge seamless nylon liner offer users excellent tactility and flexibility
Medium duty with a 10-mil shell to protect against exposure to bases, oils, fuels, some solvents, grasses and animal fats
Featuring ANSELL GRIP technology for optimal control when handling oily or wet items
Less force is required on slippery objects, reducing hand and arm fatigue
Nitrile coating offers superior snag, puncture and abrasion protection for long term wearer
Length 300mm
Reusable Latex
Specially treated to reduce the risk of allergic reactions
Thickness of 0.35mm. Provides outstanding sensitivity
Length 305mm
Powdered for easy wearing and moisture absorption
Enhanced splash protection against a wide array of chemicals
Very comfortable soft nitrile formulation for increased comfort
Silicone free
Enhanced splash protection against a wide array of chemicals
Very comfortable soft nitrile formulation for increased comfort and easy donning
Silicone free
Thinnest chemical resistant synthetic composite disposable glove
Three layer design for superior protection against harsh chemicals including acids, solvents and bases
Thin mil construction for enhanced tactility and dexterity
Ergonomic design and extra soft material for longer wear time
Silicone free formulation
Extended cuff for reliable protection against hazardous substances
Lower acceptable pinhole rate (0.65 AQL)
Fully textured glove., with non-foaming formula, for a firm wet grip when handling objects
Distinct colour to mask stains for special applications
Contains no natural rubber latex and powdered free to help protect wearers from Type 1 skin allergies, skin irritation and dryness
Higher tensile strength compared to both ASTM D6319 and EN 455 standards, allowing the hands to move freely and comfortably while wearing the Microflex 93-852
Natural rubber glove
Good mechanical and chemical protection in heavy duty environments
High resistance to certain water-based chemicals
Good flexibility and elasticity reducing risk of tears
Chlorinated to harden and easily cleanse the surface of the glove
Beaded cuff for easy donning
1.5mm Thickness
AQL 0.65
17 INCH (432mm) length
EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, AKLMPT
EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks
EN 388:2016 Protective gloves against mechanical risks 3121B
Abrasion- Level 3
Cut Resistance- Cut B
Tear- Level 2
Puncture- Level 1
Natural rubber glove
Good mechanical and chemical protection in heavy duty environments
High resistance to certain water-based chemicals
Good flexibility and elasticity reducing risk of tears
Chlorinated to harden and easily cleanse the surface of the glove
Beaded cuff for easy donning
1.5mm Thickness
AQL 0.65
24 INCH (610mm) length
EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, AKLMPT
EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks
EN 388:2016 Protective gloves against mechanical risks 3121B
Abrasion- Level 3
Cut Resistance- Cut B
Tear- Level 2
Puncture- Level 1
Natural rubber glove
Good mechanical and chemical protection in heavy duty environments
High resistance to certain water-based chemicals
Good flexibility and elasticity reducing risk of tears
Chlorinated to harden and easily cleanse the surface of the glove
Beaded cuff for easy donning
1.2mm Thickness
AQL 0.65
17 INCH (432mm) length
EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, AKLMPT
EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks
EN 388:2016 Protective gloves against mechanical risks 3121B
Abrasion- Level 3
Cut Resistance- Cut B
Tear- Level 2
Puncture- Level 1
Natural rubber glove
Good mechanical and chemical protection in heavy duty environments
High resistance to certain water-based chemicals
Good flexibility and elasticity reducing risk of tears
Chlorinated to harden and easily cleanse the surface of the glove
Beaded cuff for easy donning
1.2mm Thickness
AQL 0.65
24 INCH (610mm) length
EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, AKLMPT
EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks
EN 388:2016 Protective gloves against mechanical risks 3121B
Abrasion- Level 3
Cut Resistance- Cut B
Tear- Level 2
Puncture- Level 1
Heavyweight PVC supported glove with excellent comfort
Special nitrile and PVC blend formulation to provide good durability, protection and flexibility, even in low temperatures
㩁-gauge seamless cotton lining for added comfort and protection
Foam palm providing good oil resistant as well as good grip performance in wet & oily environment
300mm length
Food safe
EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, JKLPMT
EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks
EN 388:2016 Protective gloves against mechanical risks 4131A
Level 4- Abrasion
Level 1- Cut Resistance
Level 3- Tear Resistance
Level 1- Puncture
Level A ISO 13997 Cut Resistance
Grey - Palm coated foam nitrile with a seamless knitted liner
The original nitrile foam glove
Highly versatile solution for precision assembly and general handling
Perfect balance between comfort, dexterity and protection
Advanced Knitting Technology to increase stretch and flexibility in high-stress areas
EN388
3.1.3.1
Antistatic according to EN1149