Moldex
Moldex
Moldex is a leading manufacturer of hearing and respiratory products. Our products are created with the concept of making PPE easier, safer and more comfortable for the end-user by using innovative ideas and technologies. With huge emphasis on R&D, Moldex are continuously developing new ideas and technologies. A key factor to our success lies in attention to detail both in product development and process technology. We make almost all product components in house, down to weaving the elastic straps on our FFP's. We even make the machines that make the products, enabling us to keep improving & innovating our ranges.
An entry level comfort mask.
This dual purpose mask is ideally suited to most industrial applications.
The ActivForm® seal automatically adjusts to different face shapes without the need for a nose clip.
The loop strap allows easy application.
The DuraMesh® shell increases shape retention and durability.
The Ventex®-valve reduces moisture and heat inside the mask.
Durable and comfortable
FFP1 NR D valved
EN149:2001 + A1:2009
This dual purpose mask is ideally suited to most industrial applications.
The ActivForm® seal automatically adjusts to different face shapes without the need for a nose clip.
The loop strap allows easy application and the DuraMesh® shell increases shape retention and durability.
Durable and comfortable
FFP2 NR D non-valved
EN149:2001 + A1:2009
Suited to most industrial applications this general purpose mask is strong and durable.
The ActiveForm® and comfort nose seal automatically adjusts to different face shapes and movements to give a secure fit.
The Strap and clip allows you to hang the mask around the neck during breaks.
The DuraMesh® shell increases shape retention and durability
The Ventex®-valve reduces moisture and heat inside the mask.
FFP NR D2 valved
EN149:2001 + A1:2009
Suited to most industrial applications this general purpose mask is strong and durable.
The ActiveForm® and comfort nose seal automatically adjusts to different face shapes and movements to give a secure fit.
The Strap and clip allows you to hang the mask around the neck during breaks.
The DuraMesh® shell increases shape retention and durability
The Ventex®-valve reduces moisture and heat inside the mask.
FFP NR D3 valved
EN149:2001 + A1:2009
• Activated layer of charcoal built into this mask offers relief from low levels of gases and vapours, often found in conjunction with particulate hazards.
• Protects from nuisance levels of acid, ozone and organic gas relief.
• FFP3 protection against harmful and carcinogenic dusts, fumes and water/oil based mists/aerosols 20 x WEL
The ActiveForm® and comfort nose seal automatically adjusts to different face shapes and movements to give a secure fit.
• The Strap and clip allows you to hang the mask around the neck during breaks.
• The DuraMesh® shell increases shape retention and durability.
• Ventex®-valve reduces moisture and heat inside the mask.
• Suited to most industrial applications this general purpose mask is strong and durable.
• The ActivForm® seal automatically adjusts to different face shapes and movements , reducing the need for multiple mask sizes.
• Strap and clip, hang the mask around the neck during breaks.
• Blue clip suitable for the food industry.
• Nose seal increases fit and comfort.
• DuraMesh® for optimum shape retention and durability.
• ActivForm® seal automatically adjusts to different face shapes.
• Ventex®-valve reduces moisture and heat.
• EN149:2001 + A1:2009
• The uniquely developed Series 3000 Air from Moldex offers extremely low breathing resistance and therefore increased performance of both mask and wearer.
• The filtering surface is almost 3 times larger than a standard filter product, allowing you to breathe more easily.
• Available in TWO sizes for optimum fit.
• These masks are individually bagged and PVC Free.
• The ActivForm® and comfort nose seal automatically adjusts to different face shapes and movements to give a secure fit.
• The Strap and clip allows you to hang the mask around the neck during breaks.
• The DuraMesh® shell increases shape retention and durability.
• Ventex®-valve reduces moisture and heat inside the mask.
• FFP2 protection against toxic dusts, fumes and water/oil based mists/aerosols 10 x WEL
• The uniquely developed Series 3000 Air from Moldex offers extremely low breathing resistance and therefore increased performance of both mask and wearer.
• The filtering surface is almost 3 times larger than a standard filter product, allowing you to breathe more easily.
• Available in TWO sizes for optimum fit.
• These masks are individually bagged and PVC Free.
• The ActivForm® and comfort nose seal automatically adjusts to different face shapes and movements to give a secure fit.
• The Strap and clip allows you to hang the mask around the neck during breaks.
• The DuraMesh® shell increases shape retention and durability.
• Ventex®-valve reduces moisture and heat inside the mask.
• FFP3 protection against harmful and carcinogenic dusts, fumes and water/oil based mists/aerosols 20 x WEL
The real reusable FFP with a washable full face seal and secure fit comparable to a half mask!
• AirWave® Pleated Filter for comfortable breathing and fatigue-free work
• Longer use time, less consumption
• Comfortable full-face seal made of washable TPE material which is gentle on the skin
• Length-adjustable loop strap with clip for quick, simple and safe on and off
• ProValve: Built-in valve, reduces condensation from exhaled air
• 3D Full Face Seal: Much like a rubber half mask improves fit, and provides optimum wearing comfort.
• DuraMesh®: strong and durable structure, keeps the mask in shape
• ActivForm®: no nose clip needed
• Low Breathing Resistance: Pleated filter technology reduces inhalation resistance by up to 50% whilst maintaining filtration performance
FFP2 protection against hazardous fine dusts, water and oil based mists/aerosols, biological agents of risk Group 2.
Tested and certified to EN 149:2001+A1:2009
The real reusable FFP with a washable full face seal and secure fit comparable to a half mask!
• AirWave® Pleated Filter for comfortable breathing and fatigue-free work
• Longer use time, less consumption
• Comfortable full-face seal made of washable TPE material which is gentle on the skin
• Length-adjustable loop strap with clip for quick, simple and safe on and off
• ProValve: Built-in valve, reduces condensation from exhaled air
• 3D Full Face Seal: Much like a rubber half mask – improves fit, and provides optimum wearing comfort.
• DuraMesh®: strong and durable structure, keeps the mask in shape
• ActivForm®: no nose clip needed
• Low Breathing Resistance: Pleated filter technology reduces inhalation resistance by up to 50% whilst maintaining filtration performance
FFP3 protection against harmful and carcinogenic dusts, water and oil based mists/aerosols, biological agents of risk Group 2 and 3, CMR-substances.
Tested and certified to EN 149:2001+A1:2009
The unique pleated filter technology offers extremely low breathing resistance.
This FFP3 mask has a full face seal and adustable strap and clip.
The ActiveForm® seal automatically adjusts to different face shapes and movements to give a secure fit.
The DuraMesh® shell increases shape retention and durability
The Ventex®-valve reduces moisture and heat inside the mask.
AIR + FFP3 NR D valved
EN149:2001 + A1:2009
• Lightweight.
• One size fits all.
• Packaged in a resealable bag.
• Pleated Filter Technology.
• Large filter surface for reduced breathing resistance and increased service life.
• Quick and simple fit check.
• Low profile design for excellent field of vision.
• Compatible with other safety equipment.
FFA1P2
EN405:2001 + A1:2009
• Lightweight.
• One size fits all.
• Packaged in a resealable bag.
• Pleated Filter Technology.
• Large filter surface for reduced breathing resistance and increased service life.
• Quick and simple fit check.
• Low profile design for excellent field of vision.
• Compatible with other safety equipment.
FFA2P3
EN405:2001 + A1:2009
• Ultra compact half mask
• Maintenance free and ready for use
• Wide field of vision
• Unrestricted freedom of movement
• Lightweight and comfortable
• Flex Fit: automatically adjusts to different face shapes
• Pleated Filter Technology: low breathing resistance, high durability
FFA1B1E1P3 R D
EN 405:2009
• Lightweight.
• One size fits all.
• Packaged in a resealable bag.
• Pleated Filter Technology.
• Large filter surface for reduced breathing resistance and increased service life.
• Quick and simple fit check.
• Low profile design for excellent field of vision.
• Compatible with other safety equipment.
FFABEK1P3
EN405:2001 + A1:2009
Lightweight maintenance free half mask with replaceable particulate filters.
The 5000 Series Half Masks have integral gas filters, making the mask disposable and exempt from the maintenance requirements of COSHH if disposed of within one month or when breakthrough occurs (whichever comes first).
When particulate filters get clogged they can be replaced for prolonged use of the mask.
The low profile design offers excellent field of vision and allows the mask to be worn with additonal PPE like safety glasses.
FFABEK1 P3 R D size M/L. Organic, inorganic [Bp>650C], acid, & ammonia gases, P3 particulates
EN405:2001.
• Extremely lightweight, the mask body is made from hypoallergenic material which is gentle on the skin.
• The low profile design offers excellent field of vision.
• Easy accessible components for cleaning and maintenance.
• Use with Moldex EASYLOCK Filters system that requires no additional clips or holders.
• Size small
• Mask body only - filters sold separately
• Extremely lightweight, the mask body is made from hypoallergenic material which is gentle on the skin.
• The low profile design offers excellent field of vision.
• Easy accessible components for cleaning and maintenance.
• Use with Moldex EASYLOCK Filters system that requires no additional clips or holders.
• Size Medium
• Mask body only - filters sold separately
• Extremely lightweight, the mask body is made from hypoallergenic material which is gentle on the skin.
• The low profile design offers excellent field of vision.
• Easy accessible components for cleaning and maintenance.
• Use with Moldex EASYLOCK Filters system that requires no additional clips or holders.
• Size large
• Mask body only - filters sold separately
• Remains soft & stable in shape even at extreme temperatures
• Lightweight
• Mask body is gentle on the skin
• Easy to clean and maintain
• Low profile design for excellent field of vision
• Use with Moldex EASYLOCK filter system that requires no additional clips or holders
• All filter combinations possible
• Mask body only - available in three sizes
• 1 unit per box
• Tested and certified to EN 140:1998
• Remains soft & stable in shape even at extreme temperatures
• Lightweight
• Mask body is gentle on the skin
• Easy to clean and maintain
• Low profile design for excellent field of vision
• Use with Moldex EASYLOCK filter system that requires no additional clips or holders
• All filter combinations possible
• Mask body only - available in three sizes
• 1 unit per box
• Tested and certified to EN 140:1998
• Remains soft & stable in shape even at extreme temperatures
• Lightweight
• Mask body is gentle on the skin
• Easy to clean and maintain
• Low profile design for excellent field of vision
• Use with Moldex EASYLOCK filter system that requires no additional clips or holders
• All filter combinations possible
• Mask body only - available in three sizes
• 1 unit per box
• Tested and certified to EN 140:1998
• Extremely lightweight, the mask body is made from hypoallergenic material which is gentle on the skin.
• The low profile design offers excellent field of vision.
• Easy accessible components for cleaning and maintenance.
• Use with Moldex EASYLOCK Filters system that requires no additional clips or holders.
• Size Medium, complete with A2 P3 filters.
• A2 organic gas [Bp>65oC], 5000ppm. P3 protection against harmful and carcinogenic dusts, fumes and water/oil based mists/aerosols 10 x WEL
-
77 Products
