The 3M Peltor Optime II has been developed for demanding noise-hazard environments. The 3M Peltor Optime II provides sealing rings which are filled with a unique combination of liquid and foam. The result is an optimum seal with low contact pressure, which provides snug comfort even during long term use. The sealing rings have ventilation channels and are covered with a soft, hygienic foam. Optime II is a suitable choice for environments with substantial industrial noise or construction machinery, airports and agricultural work.

SNR=31dB, H=34dB, M=28dB, L=20dB

• Optime III is a super-muff, and has been developed for use in extremely noisy environments.

• The protection is based on a technology with a double casing that minimises resonance in the holder casing. This results in maximum high-frequency muffling, while at the same time its still easy to understand speech and signals.

• An acoustic connection between the inner volume and the volume between the casings in its turn provides maximum low-frequency muffling.

• The sealing rings are broad and filled with soft plastic foam for the best fit and low contact pressure.

• Effective protection and best comfort are the hallmarks of Optime III.

• SNR 35db

• Optime III is a super-muff, and has been developed for use in extremely noisy environments.

• The protection is based on a technology with a double casing that minimises resonance in the holder casing. This results in maximum high-frequency muffling, while at the same time its still easy to understand speech and signals.

• An acoustic connection between the inner volume and the volume between the casings in its turn provides maximum low-frequency muffling.

• The sealing rings are broad and filled with soft plastic foam for the best fit and low contact pressure.

• Effective protection and best comfort are the hallmarks of Optime III.

SNR = 35dB, H = 40dB, M = 32dB, L = 23dB

The PELTOR Optime III ear defenders are a high performance hearing protector and have been developed for use in extremely noisy environments. The protection is based on a technology with a double casing minimising resonance in the holder casing, maximising high-frequency attenuation.

SNR = 35dB, H = 40dB, M = 32dB, L = 22dB

The 3M PELTOR WorkTunes Pro Headset helps protect you from potentially harmful workplace noise while at the same time enjoy listening to the built in AM/FM radio. The built-in antenna, fast digital tuning and ability to store stations makes the hearing protector flexible and easy to work with.

Benefits
• Protect your hearing and listen to AM/FM radio at the same time with built-in antenna.
• Digital station search and voice guided menu system with announced frequencies
• 3.5 mm listen only stereo input (limited to 82 dB) for connection to external devices (e.g. mobile phone, radio, two-way radio and iPod)
• Auto power off turns headset off after 4 hours of non-use, to save energy and a low-battery warning informs you when to change batteries
• To reduce the corrosion caused by sweat the electronics are located in the outer part of the cup
• Store up to 5 stations on the headset
• 40 hours battery life

Kit contains replacement sealing rings and muffler pads which can be replaced in a few easy steps, for use with the 3M Optime I Ear Muffs.
• Extends the life of earmuffs
• Ensures good function and hygiene
• Avoid wearing uncomfortable earmuffs
• Pack contains 2 x foam inserts and 2 x sealing rings

Kit contains replacement sealing rings and muffler pads which can be replaced in a few easy steps, for use with the 3M Optime II Ear Muffs.
• Extends the life of earmuffs
• Ensures good function and hygiene
• Avoid wearing uncomfortable earmuffs
• Pack contains 2 x foam inserts and 2 x sealing rings

Kit contains replacement sealing rings and muffler pads which can be replaced in a few easy steps, for use with the 3M Optime III Ear Muffs.
• Extends the life of earmuffs
• Ensures good function and hygiene
• Avoid wearing uncomfortable earmuffs
• Pack contains 2 x foam inserts and 2 x sealing rings

Kit contains replacement sealing rings and muffler pads which can be replaced in a few easy steps, for use with the 3M PELTOR X1 Series Ear Muff.
Extends the life of earmuffs
Ensures good function and hygiene
Avoid wearing uncomfortable earmuffs
Pack contains 2 x foam inserts and 2 x sealing rings

Kit contains replacement sealing rings and muffler pads which can be replaced in a few easy steps, for use with the 3M PELTOR X2 Series Ear Muff.
Extends the life of earmuffs
Ensures good function and hygiene
Avoid wearing uncomfortable earmuffs
Pack contains 2 x foam inserts and 2 x sealing rings

Kit contains replacement sealing rings and muffler pads which can be replaced in a few easy steps, for use with the 3M PELTOR X3 Series Ear Muff.
Extends the life of earmuffs
Ensures good function and hygiene
Avoid wearing uncomfortable earmuffs
Pack contains 2 x foam inserts and 2 x sealing rings

Kit contains replacement sealing rings and muffler pads which can be replaced in a few easy steps, for use with the 3M PELTOR X4 Series Ear Muff.
Extends the life of earmuffs
Ensures good function and hygiene
Avoid wearing uncomfortable earmuffs
Pack contains 2 x foam inserts and 2 x sealing rings

Kit contains replacement sealing rings and muffler pads which can be replaced in a few easy steps, for use with the 3M PELTOR X5 Series Ear Muff.
Extends the life of earmuffs
Ensures good function and hygiene
Avoid wearing uncomfortable earmuffs
Pack contains 2 x foam inserts and 2 x sealing rings

The X-Series earmuffs are 3M's latest advancement in hearing conservation. New technologies in comfort, design and protection all come together in this groundbreaking earmuff line. The X1A is a lightweight, low- profile earmuff designed for protection against low-level industrial noise and other loud sounds. It features an electrically insulated wire headband, often referred to as "dielectric".

• The wire headband offers consistent pressure over prolonged wearing periods.
• Earcup pivot points tilt for optimum comfort and efficiency.
• Noise Reduction Rating (NRR)b 22 dB. CSA Class A.

NOTE: The X-Series (over-the-head) headband version is electrically insulated - sometimes referred to as "dielectric". The metal components of the headband have been covered by non-conductive material for use in a low voltage electrical hazard (less than 440 V ac). As there are no applicable standards for testing ear muffs against electrical insulating properties, the product has been evaluated at an external laboratory against a modified test method based on EN397:1995. During assessment, the leakage current did not exceed 1.2mA when the external surface of the product made contact with an electrical source. The user must determine the overall suitability of this product for the intended application taking into account any hazards other than noise for which this product is tested.

The NRR may overestimate the hearing protection provided during typical use. 3M recommends reducing the NRR by 50% for estimating the amount of noise reduction provided.

The 3M Peltor X1 Ear Defenders are designed to offer protection against light industry noise. For example, grounds maintenance or power drilling.

• Slim-line cups for moderate attenuation that meets the needs of most industrial applications.
• Lightweight design.
• Simple colour coding: green, indicating the first level of attenuation within this range.

Attenuation: SNR=26dB, H=30dB, M=23dB, L=15dB

The X-Series earmuffs are 3M's latest advancement in hearing conservation. New technologies in comfort, design and protection all come together in this groundbreaking earmuff line. The X2A is a lightweight, lower-profile earmuff designed for protection against low-to-moderate level industrial noise and other loud sounds. It features an electrically insulated wire headband, often referred to as "dielectric".

• The wire headband offers consistent pressure over prolonged wearing periods.
• Earcup pivot points tilt for optimum comfort and efficiency.
• Noise Reduction Rating (NRR)b 24 dB. CSA Class A.

NOTE: The X-Series (over-the-head) headband version is electrically insulated - sometimes referred to as "dielectric". The metal components of the headband have been covered by non-conductive material for use in a low voltage electrical hazard (less than 440 V ac). As there are no applicable standards for testing ear muffs against electrical insulating properties, the product has been evaluated at an external laboratory against a modified test method based on EN397:1995. During assessment, the leakage current did not exceed 1.2mA when the external surface of the product made contact with an electrical source. The user must determine the overall suitability of this product for the intended application taking into account any hazards other than noise for which this product is tested.

The NRR may overestimate the hearing protection provided during typical use. 3M recommends reducing the NRR by 50% for estimating the amount of noise reduction provided.

The 3M Peltor X2 Ear Defenders are designed to offer protection against moderate to high noise levels. For example, roadworks or construction.

• Slim-line cups for moderate to high attenuation that meets the needs of most industrial applications.
• Lightweight design.
• Simple colour coding: yellow, indicating moderate to high attenuation.

Attenuation: Helmet Attachment: SNR=30dB, H=33dB, M=28dB, L=19dB

The X-Series earmuffs are 3M's latest advancement in hearing conservation. New technologies in comfort, design and protection all come together in this groundbreaking earmuff line. The X3A features a newly designed spacer to help improve attenuation without the need for a much larger cup or double cup design. This lightweight earmuff is designed for protection against high-level industrial noise and other loud sounds. It features an electrically insulated wire headband, often referred to as "dielectric"

• The wire headband offers consistent pressure over prolonged wearing periods.
• Earcup pivot points tilt for optimum comfort and efficiency.
• Noise Reduction Rating (NRR)b 28 dB. CSA Class AL.

NOTE: The X-Series (over-the-head) headband version is electrically insulated - sometimes referred to as "dielectric". The metal components of the headband have been covered by non-conductive material for use in a low voltage electrical hazard (less than 440 V ac). As there are no applicable standards for testing ear muffs against electrical insulating properties, the product has been evaluated at an external laboratory against a modified test method based on EN397:1995. During assessment, the leakage current did not exceed 1.2mA when the external surface of the product made contact with an electrical source. The user must determine the overall suitability of this product for the intended application taking into account any hazards other than noise for which this product is tested.

The NRR may overestimate the hearing protection provided during typical use. 3M recommends reducing the NRR by 50% for estimating the amount of noise reduction provided.

The 3M Peltor X3 Ear Defenders are designed to offer protection against high noise levels. For example, forestry or heavy engineering.

The 3M Peltor X3 utilises a newly designed spacer to help improve attenuation without the need for a double cup design, thus increasing the space inside the cup for greater comfort and wearability.
• High attenuation from a single cup design
• Light-weight and slim compared with similarly attenuating products.
• Simple colour coding: red indicating high attenuation.

Attenuation: Helmet Attachment: SNR=32dB, H=34dB, M=30dB, L=24dB

The X-Series earmuffs are 3M's latest advancement in hearing conservation. New technologies in comfort, design and protection all come together in this groundbreaking earmuff line. The X4A utilizes a newly designed spacer, specially formulated foam liners and innovative ear cushions to help improve attenuation. This lightweight, lower-profile earmuff helps with compatibility with other personal protective equipment and is designed for protection against moderate-to-high level industrial noise and other loud sounds. It features an electrically insulated wire headband, often referred to as "dielectric".

• The wire headband offers consistent pressure over prolonged wearing periods.
• Earcup pivot points tilt for optimum comfort and efficiency.
• Noise Reduction Rating (NRR)b 27 dB. CSA Class AL.

NOTE: The X-Series (over-the-head) headband version is electrically insulated - sometimes referred to as "dielectric". The metal components of the headband have been covered by non-conductive material for use in a low voltage electrical hazard (less than 440 V ac). As there are no applicable standards for testing ear muffs against electrical insulating properties, the product has been evaluated at an external laboratory against a modified test method based on EN397:1995. During assessment, the leakage current did not exceed 1.2mA when the external surface of the product made contact with an electrical source. The user must determine the overall suitability of this product for the intended application taking into account any hazards other than noise for which this product is tested.

The NRR may overestimate the hearing protection provided during typical use. 3M recommends reducing the NRR by 50% for estimating the amount of noise reduction provided.

The 3M Peltor X4 Ear Defenders are designed to offer protection against high noise levels, whilst maintaining a sleek, low profile, aesthetically pleasing design.

Historically, higher attenuating ear muffs meant large and bulky cups - but not anymore. The 3M Peltor X4 Ear Defenders can attenuate sound by as much as 32dB whilst maintaining a sleek, low profile, aesthetically pleasing design.

• Extremely slim and light-weight cups help to improve compatibility when used with other Personal Protective Equipment.
• New specially formulated damping pads and innovative foam contained in the sealing ring provide excellent acoustic protection, particularly against sounds dominated by low frequencies.
• Simple colour coding: bright green, indicating high attenuation combined with an extremely slim, lightweight design

Attenuation: Helmet Attachment: SNR=32dB, H=36dB, M=30dB, L=21dB

The 3M Peltor X5 Ear Defenders are designed to offer protection against extremely high noise levels. For example airports, quarrying or paper mills.

• Unparalleled attenuation (SNR 37dB) as a result of an optimum combination of specially formulated foam technology and a newly designed spacer and cup.
• Despite the larger cups the product remains relatively lightweight with excellent balance and wearer comfort.
• Simple colour coding: black, for extremely high attenuation in demanding environments.

Attenuation
Headband: SNR=37dB, H=37dB, M=35dB, L=27dB

The X-Series earmuffs are 3Ms latest advancement in hearing conservation. New technologies in comfort, design and protection all come together in this groundbreaking earmuff line. The X5A earmuffs offer the highest NRR (31 dB) for an earmuff on the market which makes them ideal for very high noise situations. The high attenuation delivered by X5A earmuffs is possible as a result of a combination of advanced technologies including: newly designed spacers, specially formulated earcup liners and innovative foam contained in the cushions. It features an electrically insulated wire headband, often referred to as ?dielectric?.

• Replaceable ear cushions and foam liners (hygiene kit HYX5).
• Noise Reduction Rating (NRR)b 31 dB. CSA Class AL.

SNR=36dB, H=36dB, M=34,dB, L=26dB

1100 Series Ear Plugs Dispenser Refill Pack.
The comfortable foam plugs Uncorded version 3M 1100 are soft, disposable, polyurethane foam earplugs offering excellent protection.

• Soft polyurethane foam offers maximum wearer comfort
• Smooth dirt-resistant surface.
• Tapered design fits most ear canals.

Attenuation: SNR=37dB, H=37dB, M=34dB, L=31dB